Corrugated Folding Printing Presses(PS/FG-280)

Carton Box Machine
The carton box machine is suitable for producing any packing box. The box wall can be really durable for wide range of application.
The carton box machine is equipped with PLC panel and can be controlled by the engineer appropriately. The client can order the carton box machine by their wishes such as machine size, finished blank, panel size, slotting depth, square box, the width of the sheet and printing area.
The carton box machine has dust brushes, which maintain the cleanness of the working platform. It is the most inconvenience tool makes your working smoothly. Therefore, you don’t have to stop the carton box machine and clean the platform. It is also has movable central knife designed for two piece joined carton production without dismantling any knife, which is a special designation in order to make the productivity rate more higher.
Moreover, the carton box machine has steel space collars which allow for long lifespan of slotting knives and creasing wheels and dust-proofed oil seals allow smooth and precise positioning performance of slotting and creasing. Both of the tools are invented for the proposals of efficiency that can support the carton box machine achieve the required goal. The carton box machine have a accurate computer calculating system, providing a faster feeding paper rate, meanwhile it has the self recovery ability automatically once the paper or large volume dust causing any obstruction on the feed area of the carton box machine.
The machine is designed with friendly interface, allowing single operator at any time. The automatically protection system and variable frequency speed controlled by operator are just two of the advantage of the carton box machine. You can also found its multiple functions on the users’ manual. Further more, the carton box machine can be produced customize, you can decide which utilities and functions are most useful to your product. You will never regret to select this carton box machine.
  • max. maching speed : 250
  • production speed : 30~200
  • max. sheet feeding size : 880mm* 2100mm
  • max. sheet feeding size (skip feed) : 1000mm* 2100mm
  • min. sheet feeding size : 250mm* 580mm
  • max. printing size : 820mm* 2000mm
  • min. printing size : 250mm*580mm
  • max. slotting size : 880mm* 2000mm
  • min. slotting size : 280mm* 720mm / 280mm* 580mm(for offsetting size) / 280mm* 640mm(square box)
  • max. die cutting size : 880mm* 1900mm
  • min. die cutting size : 250mm* 580mm
  • max. folding glueing area : 880mm* 2000mm
  • min. folding glueing area : 280mm* 720mm / 280mm* 580mm(for offsetting size) / 280mm* 640mm(square box)
  • Feeding 1 : Equipped with Kicker feeder or Lead edge feeder for high feeding accuracy.
  • Feeding 2 : Use dust brushes/chamber/collector to achieve best performance of dust-removal for high printing quality. Dual feeding rolls provide smooth feeding without destroying flute profile.
  • Feeding 3 : Individual left. right side guides and backstop controlled by PLC.
  • Feeding 4 : Double strength locking system when machine is overall closed, provide stable running condition with high speed.
  • Printing 1 : Differential-eccentric reduction gear system provides light pressure loading extends lifespan of transmission gears.
  • Printing 2 : Vacuum transfer with tungsten carbide rolls overcome warped board and slippery boards, providing.
  • Printing 3 : Automatic zero setting with digital displayed : Motorized micro lateral adjustment of printing plate cylinder with digital displayed.
  • Printing 4 : Ceramic anilox roll with Chamber doctor blade system (Optional) for high graphic printing purpose and cost saving from ink amount.
  • Dryer 1 : Control of temperature and air volume can be preset by touch screen located at Vacuum Transfer control panel.
  • Dryer 2 : Equipped with board jammed detector.
  • Slotter 1 : Movable central knife designed for two piece joined carton production without dismantling any knife.
  • Slotter 2 : Dual lead screws designed with pre-creasing. creasing and slotting stands for parallel and accurate lateral movements.
  • Slotter 3 : Steel space collars allow for long lifespan of slotting knives and creasing wheels : Dust-proofed oil seals allow smooth and precise positioning performance of slotting and creasing.
  • Slotter 4 : Pre-creasing and knife designed at 1:1 ratio for preventing printing board messed up : Allow better creasing performance.
  • Slotter 5 : Quick set up device for offset pre-creasing (Optional).
  • Slotter 6 : Mounting device of hand/air hole die cutting mold (Optional).
  • Die Cutting 1 : 100mm Automatic lateral oscillating of hydraulic anvil cylinder.
  • Die Cutting 2 : Device of Polyurethane anvil regrinding allows better lifespan.
  • Die Cutting 3 : Device of speed compensation allows 1:1 ratio between PU an Die mold cylinders to achieve high accurate cutting performance.
  • Die Cutting 4 : Equipped with paper scrapes belt conveyor.
  • Stacker 1 : Available for control link with printing.
  • Stacker 2 : Equipped with hydraulic safety design prevents outrigger dropping.
  • Stacker 3 : Flap device for cartons squaring.
  • Stacker 4 : Paper scrape vibrator (Optional).
  • Folding & Gluing 1 : Fully automatic for order set-up and positioning.
  • Folding & Gluing 2 : Individual invertors control for upper and bottom lateral arms adjustment.
  • Folding & Gluing 3 : Inidvidual speed adjustment for bottom vacuum belts.
  • Folding & Gluing 4 : Equipped with air blower for quick adhesion of cartons.
  • Folding & Gluing 5 : Equipped with gluing wheel : Or Valco glue spray device (Optional) for glue amount deduction.
model no. ps/fg-280
macnine inner frame width 2400mm
machine size 880mm* 2100mm
finished blank max 2100mm
finished blank min 720mm+glue lap width / 580mm+glue lap width(square box) / 640mm+glue lap width
two panel max none
small panel(at trim) max 870mm / 855mm(square box) / 840mm(for offsetting size)
small panel(at trim) min 130mm / 145mm(square box) / 160mm(for offsetting size)
large panel(at glue lap) max 770mm / 855mm(square box) / 840mm(off setting size)
large panel(at glue lap) min 230mm / 145mm(square box) / 160mm(off setting size)
glue lap width max 50mm
slotting depth min 80mm
square box max 1000mm
square box min 290mm / 320mm(O)
sheet width(standard regjlareffed) max 880mm
sheet width(standard regjlareffed) min/vacuum 250mm / 250mm
sheet width(skip feed) max 990mm
printing area(width/ length) max 820mm* 2000mm